Creality CR10S: Difference between revisions
m (→Bed) |
m (Operator's log added. Entries added to operator's log.) |
||
| Line 37: | Line 37: | ||
=== Bed === | === Bed === | ||
The build surface was blue tape when the printer was first donated. The build surface was the Creality "Carborundum" tempered glass bed. As of 2022-08-22, the bed is binder-clipped, PEI coated steel. | The build surface was blue tape when the printer was first donated. The build surface was the Creality "Carborundum" tempered glass bed. As of 2022-08-22, the bed is binder-clipped, PEI coated steel. | ||
== Operator's Log == | |||
==== 2022-08-26 Yangbot ==== | |||
Bed adhesion issues noted when printing bike handlebar spacers. | |||
==== 2022-08-28 [[User:Blu | Brandon]] ==== | |||
Bed adhesion issues confirmed. | |||
Bed leveling was completed successfully, but there is a significant dip in the center and center, right side of the 3d printer bed. Bed leveling shows concerning data: | |||
{| class="wikitable" | |||
!colspan=3| 0.2mm leveling data | |||
|- | |||
| 0.225 || 0.225 || 0.275 | |||
|- | |||
| 0.225 || -0.050 || 0.000 | |||
|- | |||
| 0.275 || 0.250 || 0.300 | |||
|} | |||
[[Category:3D_Printers]] | [[Category:3D_Printers]] | ||
Revision as of 16:46, 28 August 2022
| Creality-CR10S |
|---|
|
|
| 3D Printer |
|
Brand: Creality
Materials: ABS, PLA, PETG |
History
The Creality-CR10S was donated by Kyle. Thanks.
The glass build bed was donated by Michael.
Hotend
The hotend was previously clogged with a giant blob of PLA. Please watch your prints through the first layer at least. Not all prints will succeed, but you are more likely to succeed after the first layer is printed.
The thermistor on the hotend was replaced on 2022-07-20. Problems were noted in June.
Bed
The build surface was blue tape when the printer was first donated. The build surface was the Creality "Carborundum" tempered glass bed. As of 2022-08-22, the bed is binder-clipped, PEI coated steel.
Operator's Log
2022-08-26 Yangbot
Bed adhesion issues noted when printing bike handlebar spacers.
2022-08-28 Brandon
Bed adhesion issues confirmed.
Bed leveling was completed successfully, but there is a significant dip in the center and center, right side of the 3d printer bed. Bed leveling shows concerning data:
| 0.2mm leveling data | ||
|---|---|---|
| 0.225 | 0.225 | 0.275 |
| 0.225 | -0.050 | 0.000 |
| 0.275 | 0.250 | 0.300 |