Stuff Maglab needs: Difference between revisions

From MAGLab
Jump to navigation Jump to search
(Created page with "== IRC Channel == Unfortunately, Freenode had suspended registration since June and is yet to allow any new applications through. I'll try to get into contact with a staffer t...")
 
No edit summary
Line 1: Line 1:
*Folding Chairs
*Fire Extinguisher
*Eye Wash
*Hand Tools
*Shop-VAC w/ HEPA
*Cups
*Power strips
*Extention Cords
* Garden Hose
*Disposable Gloves
*Tap and Die set
*clock
*tire repair kit
*chain
==For the mill==
-specific nuts and bolts
-belt 35"x3/8" std. "v"
-tool holding
-marking compount
==For the Compressor==
-pneumatic fittings
-hose reel
-SCH 40 3/4" PVC
-wall brackets for PVC
==For the Sandblaster==
-weather stripping
-single sided and double sided
==For the Electrical==
-#8 solid wire 100'
-3-phase breaker
-220v 1phase
== IRC Channel ==
== IRC Channel ==
Unfortunately, Freenode had suspended registration since June and is yet to allow any new applications through. I'll try to get into contact with a staffer the following days, but if we can't manage Freenode, there's other servers that we can probably use.
Unfortunately, Freenode had suspended registration since June and is yet to allow any new applications through. I'll try to get into contact with a staffer the following days, but if we can't manage Freenode, there's other servers that we can probably use.

Revision as of 05:13, 7 November 2012

  • Folding Chairs
  • Fire Extinguisher
  • Eye Wash
  • Hand Tools
  • Shop-VAC w/ HEPA
  • Cups
  • Power strips
  • Extention Cords
  • Garden Hose
  • Disposable Gloves
  • Tap and Die set
  • clock
  • tire repair kit
  • chain

For the mill

-specific nuts and bolts -belt 35"x3/8" std. "v" -tool holding -marking compount

For the Compressor

-pneumatic fittings -hose reel -SCH 40 3/4" PVC -wall brackets for PVC

For the Sandblaster

-weather stripping -single sided and double sided

For the Electrical

-#8 solid wire 100' -3-phase breaker -220v 1phase


IRC Channel

Unfortunately, Freenode had suspended registration since June and is yet to allow any new applications through. I'll try to get into contact with a staffer the following days, but if we can't manage Freenode, there's other servers that we can probably use.