BLu Delta 3D Printer: Difference between revisions

From MAGLab
Jump to navigation Jump to search
No edit summary
(Redirected page to Kossel Delta 3D Printer)
Tag: New redirect
 
Line 1: Line 1:
'''BLu Delta''' is a RepRap Kossel made by Brandon Lu.
#REDIRECT [[Kossel_Delta_3D_Printer]]
 
== General Advice and Precautions ==
It is by no means safe to operate this delta if the user wishes to consider himself a sane and rational human being.
 
Operating this delta would create a situation in which the user ceases to be a sane and rational human being.  The user may become a robot.  Or you may lose your sanity.
 
Either way, ask before using.  The last time somebody used without asking, the extruder was clogged and needed to be unclogged through a two-hour process.
 
=== Precautions ===
Do not let the extruder heat up without a powered fan.  The recommended fan setting is always above 20%.  The printer accepts fan commands in pulse-width-modulated counts ranging from 0 to 255.  Always set the printer to a count of 51 or more counts when the extruder is heated up or it is expected to heat up.
 
== Configuration ==
TODO
 
=== Slic3r ===
TODO
 
=== Cura ===
TODO
 
== Materials ==
=== ABS ===
TODO
=== PLA ===
TODO
=== TPE / TPC ===
Flexible filaments will not work reliably with BLu printer since the printer has a bowden-tube extruder.
 
== History ==
=== Head clogs ===
The printer has been clogged at least five times.  Every clog was because of incorrect heat application and has required specialty repairs.
 
== Lending Terms ==
BLu Delta is currently on loan from [[User:BLu]], hereinafter referred to as "owner."
 
Any member or visitor of MAG Laboratory, heinafter referred to as "user," '''''may''''' use the printer given the included configurations and with modifications of these printer configurations.
Users excluding qualified 3d printer maintainers as defined by the owner '''''shall not''''' attempt alterations or repairs on the printer.
Users excluding qualified 3d printer maintainers as defined by the owner '''''shall not''''' attempt to change filament on the printer.  (Soon to change)

Latest revision as of 06:06, 26 July 2020

Redirect to:

Retrieved from "https://www.maglaboratory.org/w/index.php?title=BLu_Delta_3D_Printer&oldid=1327"