K40 Laser Cutter: Difference between revisions
| Line 42: | Line 42: | ||
=== Air Assist Upgrades === | === Air Assist Upgrades === | ||
[[File:K40DragChainBracket.stl]] | |||
[[User:BLu]] added a drag chain for the air assist on 2021-01-24. | [[User:BLu]] added a drag chain for the air assist on 2021-01-24. | ||
The air assist pump and nozzle were installed on 2021-01-31. | The air assist pump and nozzle were installed on 2021-01-31. | ||
Revision as of 14:01, 3 February 2021
 Location: Electronics Room |
| Laser Cutter |
|---|
|
Brand: Chinesium |
Getting Started
TODO
General Advice and Precautions
Do not place hand along laser path.
Software Support
TODO
Materials
TODO
History
The K40 is a complex machine with a history of previous activity. Delve into the mysteries of this delightful machine here.
Gallery
Lid On
Interior (pre-air-assist)
Laser Path
The focusing mirror was broken on 2021-01-26 and subsequently replaced on 2021-02-01.
Air Assist Upgrades
User:BLu added a drag chain for the air assist on 2021-01-24.
The air assist pump and nozzle were installed on 2021-01-31.
Alignment
User:BLu first aligned the laser on 2020-12-24.
Acquisition
The K40 laser cutter was purchased by User:BLu on 2020-12-03 and arrived at MAG Laboratory on 2020-12-07.
Future Upgrades
The K40 is due for many future upgrades including but not limited to:
- air assist
- height adjustable table
- visible laser cutting locator