Creality CR10S: Difference between revisions
Jump to navigation
Jump to search
(Created page with "{| class="wikitable" style="float:right;" !Creality-CR10S |- | 300px<br/> '''Location:''' Electronics Room <br/> '''Ownership:''' MAG Laboratory <br/>...") |
mNo edit summary |
||
| Line 25: | Line 25: | ||
|} | |} | ||
== History == | |||
The Creality-CR10S was donated by Kyle. Thanks. | The Creality-CR10S was donated by Kyle. Thanks. | ||
The glass build bed was donated by Michael. | The glass build bed was donated by Michael. | ||
=== Hotend === | |||
The hotend was previously clogged with a giant blob of PLA. Please watch your prints through the first layer at least. Not all prints will succeed, but you are more likely to succeed after the first layer is printed. | |||
The thermistor on the hotend was replaced on 2022-07-20. Problems were noted in June. | |||
=== Bed === | |||
The build surface was blue tape. The build surface now is the Creality "Carborundum" tempered glass bed. | |||
Revision as of 11:32, 31 July 2022
| Creality-CR10S |
|---|
|
|
| 3D Printer |
|
Brand: Creality
Materials: ABS, PLA, PETG |
History
The Creality-CR10S was donated by Kyle. Thanks.
The glass build bed was donated by Michael.
Hotend
The hotend was previously clogged with a giant blob of PLA. Please watch your prints through the first layer at least. Not all prints will succeed, but you are more likely to succeed after the first layer is printed.
The thermistor on the hotend was replaced on 2022-07-20. Problems were noted in June.
Bed
The build surface was blue tape. The build surface now is the Creality "Carborundum" tempered glass bed.