Kossel Delta 3D Printer
 Location: 3D Printer Desk |
| 3D Printer |
|---|
| Type: Reprap - Kossel Build Volume: Diameter: 200mm, Height: 260mm |
RepRap Kossel printer on loan from Brandon Lu.
General Advice and Precautions
Do not use without first getting permission from Brandon. Components such as the extruder are finicky and may be seriously damaged without the proper settings.
Precautions
Cooling
Do not let the extruder heat up without a powered fan. The recommended fan setting is always above 20%. The printer accepts fan commands in pulse-width-modulated counts ranging from 0 to 255. Always set the printer to a count of 51 or more counts when the extruder is heated up or it is expected to heat up.
Bed Leveling
Please consult Brandon before attempting to relevel the bed. Removing the glass with the parts before breaking the parts loose helps to reduce the need to frequently relevel the bed.
Directions
The Octoprint server can be reached at http://192.168.254.95 Login credentials can be found on the printer.
Slicing with Octoprint (easiest)
- Click "Upload" button
- Select the file you want to upload
- In the "Slicing *file you selected*" prompt, select slicing profile (Kossel, Kossel Support 1, Kossel Support 2). Support 1 generates support material only where the part overhangs above the bed while support 2 also generates support material where the part overhangs above itself.
- Click the "Slice" button.
- In the "files" section click the .gco file you just created.
- Click "GCode Viewer" tab on right half of the screen to view the slicer output. Layers can be viewed by dragging the sliders adjacent to the simulated platform area or by clicking the buttons.
- If you are satisfied with the slicer output, click "Print" in the "State" section of the page.
- The printer will initiate printing.
Configuration
This is for setup. Under normal circumstances, there is no need to modify these values.
Serial Connection
Serial Port: Auto
Baudrate: 250000
Printer Profiles
Print bed & build volume
Form Factor: Circular
Heated Bed: Checked
Diameter (X/Y>: 200mm
Height (Z): 260mm
Axes
Maximum Feed Rate (X, Y, Z, E): 6000, 6000, 6000, 300
Invert Control: Unchecked
Materials
PLA & ABS: Preferred materials for this printer
TPE / TPC: Flexible filaments will not work reliably with Kossel printer since the printer has a bowden-tube extruder.
History
Head clogs
The printer has been clogged at least five times. Every clog was because of incorrect heat application and has required specialty repairs.
Lending Terms
Kossel Delta is currently on loan from User:BLu, hereinafter referred to as "owner."
Any member or visitor of MAG Laboratory, heinafter referred to as "user," may use the printer given the included configurations and with modifications of these printer configurations. Users excluding qualified 3d printer maintainers as defined by the owner shall not attempt alterations or repairs on the printer. Users excluding qualified 3d printer maintainers as defined by the owner shall not attempt to change filament on the printer. (Soon to change)