File:Homemade CNC Dremel Routes.jpg

No higher resolution available.

Homemade_CNC_Dremel_Routes.jpg ‎(400 × 300 pixels, file size: 109 KB, MIME type: image/jpeg)

Homemade CNC Dremel Route

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	16:45, 9 December 2012		400 × 300 (109 KB)	Mark r (talk \| contribs)	Homemade CNC Dremel Route

You cannot overwrite this file.

There are no pages that use this file.

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	NIKON
Camera model	COOLPIX P500
Exposure time	1/30 sec (0.033333333333333)
F Number	f/3.4
ISO speed rating	200
Date and time of data generation	21:11, 8 December 2012
Lens focal length	4 mm
Orientation	Normal
Horizontal resolution	300 dpi
Vertical resolution	300 dpi
Software used	Paint.NET v3.5.6
File change date and time	21:11, 8 December 2012
Y and C positioning	Co-sited
Exposure Program	Normal program
Exif version	2.3
Date and time of digitizing	21:11, 8 December 2012
Meaning of each component	Y Cb Cr does not exist
Image compression mode	2
APEX exposure bias	0
Maximum land aperture	3.5 APEX (f/3.36)
Metering mode	Pattern
Light source	Unknown
Flash	Flash fired, auto mode
Supported Flashpix version	1
Color space	sRGB
File source	Digital still camera
Scene type	A directly photographed image
Custom image processing	Normal process
Exposure mode	Auto exposure
White balance	Auto white balance
Digital zoom ratio	0
Focal length in 35 mm film	23 mm
Scene capture type	Portrait
Scene control	Low gain up
Contrast	Normal
Saturation	Normal
Sharpness	Normal
Subject distance range	Unknown