Creality CR10S

Creality-CR10S
Location: Electronics Room Ownership: MAG Laboratory Status: Fully Working Usage Restrictions: N/A
3D Printer
Brand: Creality Model: CR10S Type: Cartesian Quality: Hobby Build Volume: Length: 300mm Width: 300mm Height: 400mm Materials: ABS, PLA, PETG Nozzle Size 0.4mm

History

The Creality-CR10S was donated by Kyle. Thanks.

The glass build bed was donated by Michael.

Hotend

The hotend was previously clogged with a giant blob of PLA. Please watch your prints through the first layer at least. Not all prints will succeed, but you are more likely to succeed after the first layer is printed.

The thermistor on the hotend was replaced on 2022-07-20. Problems were noted in June.

Bed

The build surface was blue tape when the printer was first donated. The build surface was the Creality "Carborundum" tempered glass bed. As of 2022-08-22, the bed is binder-clipped, PEI coated steel.

Operator's Log

2022-08-26 Yangbot

Bed adhesion issues noted when printing bike handlebar spacers.

2022-08-28 Brandon

Bed adhesion issues confirmed.

Bed leveling was completed successfully, but there is a significant dip in the center and center, right side of the 3d printer bed. Bed leveling shows concerning data:

0.2mm leveling data
0.225	0.225	0.275
0.225	-0.050	0.000
0.275	0.250	0.300