QiDi X-Plus 3D Printer

From MAGLab
Revision as of 09:32, 12 May 2023 by Blu (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
QiDi X-Plus 3D Printer

3DQiDi.jpg
Location: Purg-ed
Ownership: Purg-ed
Status: Purg-ed
Usage Restrictions: Purg-ed

3D Printer

Brand: QiDi
Model: X-Plus
Type: Cartesian
Quality: Prosumer
Build Volume:

  • Length: 270mm
  • Width: 200mm
  • Height: 200mm

Materials: ABS, PLA, PETG
Nozzle Size 0.4mm

The QiDi X-Plus 3D printer was at MAG Laboratory until Summer 2022 and was nearly always plagued with 3d printing extrusion problems. A number of solutions were proposed and implemented, but none worked. It seems like the 3d printer only extruded the correct amount of filament at very low speeds (< 20 mm/s). The 3d printer was eventually purg-ed from the space.

Other 3D Printers

This is a part of our ongoing effort to document our 3D printers.

Retrieved from "https://www.maglaboratory.org/w/index.php?title=QiDi_X-Plus_3D_Printer&oldid=2382"