IT Notes
These are information technology notes that somebody told User:Blu to create.
Accounts on MAG Laboratory
Getting an account on this wiki is meant to be difficult. todo: image here
The normal account creation path would be to create an account on the MAG Laboratory "Members Only" section. Currently, this functionality is broken.
Please e-mail either the contact at maglaboratory or the webdev at maglaboratory to ask for a wiki account. It is also possible to DM in an appropriate managed social media account.
MAG Laboratory IT Services
Below is a directory of common services that may be used on the MAG Laboratory intranet and a copy of our certificate authority (CA) public key. You may want to install the CA on your computer to automatically trust signed MAG Laboratory intranet services.
Google Drive Link to MAG Laboratory CA Public Key
Before that, please ask for the default MAG Laboratory credentials to access anything on publicly available at the MAG Laboratory. Most services will be locked behind the default credentials.
3D Printer
The 3d printer is running a version of octoprint and can be accessed at the link below.
Intranet Speed Test
This service is archived.
The intranet speed test was be accessed at the link below. Remember that it only tests the link between your computer and the MAG Laboratory service host, not the internet.
Grafana
Intranet users may be interested in the status of MAG Laboratory's HAL or other devices on the intranet. All Grafana dashboards are set for public viewability. Follow the link below:
Mattermost
Intranet makerspace task organization, checklist, and chat client
Nextcloud
Intranet file storage and sharing server. Runs Nextcloud. Similar to Google Drive?
Outside Cameras
These cameras should be accessed through VLC or another RTSP compatible player. The original camera streams are mirrored and should be viewed through the listed mirror below.
Note: that the default streams are at a rather large resolution. The substreams are recommended.
| Camera | URL |
|---|---|
| Camera 1 | rtsp://maglab:[email protected]:8554/Camera1
|
| Camera 1 Low Bandwidth | rtsp://maglab:[email protected]:8554/Camera1_sub
|
| Camera 2 | rtsp://maglab:[email protected]:8554/Camera2
|
| Camera 2 Low Bandwidth | rtsp://maglab:[email protected]:8554/Camera2_sub
|
Wireguard
Wireguard is the name of a VPN solution which requires MAG Laboratory to pre-define IP addresses for VPN users.
These addresses are on the 192.168.128.0/24 subnet.
The following addresses are already assigned:
| IP | Assignment |
|---|---|
| .1 | WG server |
| .2 | Brandon's laptop |
| .3 | Richard's laptop |
| .4 | Brandon's Moto phone |
| .5 | Brandon's Pixel phone |
| .8 | Michael |
| .9 | Tina |
| .10 | Brandon's laptop |
| .11 | Brandon's other phone |
| .12 | Kevin-M4600 |
| .13 | Kevin-Phone |
Minecraft
MAG Laboratory is running a modded minecraft server as of the time of this writing. The server has two standout technology mods for your enjoyment: Ad Astra and Tech Reborn. There is also Farmer's Delight and other quality of life mods for your enjoyment along with a host of performance enhancement mods.
The minecraft server originally started as an open house event on 2022-10-08.
Upon spawning into the minecraft world, the central base will be to your East. There is also our local village complete with commieblock to the East but across an ocean.
The client is downloadable from the following intranet link: https://stor.maglab/s/WWkHtM85YsnEffp
Local IT support is available.
Maintenance Log
2022-11-14: Minecraft client and server were updated to the latest versions of the mods. Still running 1.19.2.
IP Assignment on the MAG Laboratory Network
The local DHCP only assigns IP addresses from 10.110.0.100 to 10.110.0.245. Addresses below 100 are assigned statically by the DHCP and are listed here:
Note that the local DNS assigns addresses to *.maglab. This makes it so that you should find the router under router.maglab.
The Routers
| IP | Name | Comment |
|---|---|---|
| .1 | router | CARP address for the HA router cluster. |
| .2 | switch | The PowerConnect 2724 switch mounted on the MAG Lab wall. |
| .3 | router-front | Wifi for the front of the space |
| .4 | wifi | Wifi for the back of the space |
| .5 | opnsense00 | The router and source of network services. |
| .6 | opnsense01 | The backup router and source of backup concurrent services. |
| .7 | TL-SG108PE | Managed Switch |
| .8 | TL-SG108E | Managed Switch |
| .9 | PC 2724 | Managed Switch |
The MAG Lab Machines
| IP | Name | Comment |
|---|---|---|
| .10 | Proxmox | The hosting for containers and VMs on the network. |
| .11 | Toaster | The computer sitting in the electronics room. |
| .12 | MAGLAB-CRYZEN | The computer in the conference room. |
| .13 | proxmox01 | Second container and VM host. |
| .14 | proxmox02 | Third container and VM host. Why do we need CEPH again? |
The Internet of Trash and Single-Board Computers
| IP | Name | Comment |
|---|---|---|
| .20 | hal | Host of the front display and most makerspace monitoring services. |
| .21 | daisy | Host of back-of-space makerspace monitoring services. |
| .23 | creality | Octoprint server for the creality 3d printer |
| .24 | george | Local GPS disciplined, Stratum 1 NTP time server |
| .25 | Camera1 | Security Camera, Outdoor, South-Facing |
| .26 | Camera2 | Security Camera, Outdoor, West-Facing |
| .27 | iiip | Octoprint server for the iiip 3d printer |
| .28 | pulsexe | Octoprint server for the Pulse XE 3d printer |
| .29 | NPI1F9BEE | The HP Laserjet P2035n laser printer |
| .30 | Camera3 | Security Camera, Indoor, Kitchen |
| .31 | Camera4 | Security Camera, Indoor, Electronics |
| .32 | Camera5 | Security Camera, Indoor, Shop Front |
| .33 | Camera6 | Security Camera, Indoor, Shop Machining |
| .34 | Camera7 | Security Camera, Indoor, Shop Hand Tools |
| .35 | PrusaXL0 | Prusalink interface for the Prusa XL 3d printer |
Containers
| IP | Name | Comment |
|---|---|---|
| .50 | thelog | Makerspace log aggregator |
| .51 | connor | Security camera recorder and mirror |
| .52 | jane | Makerspace Grafana server |
| .53 | graylog | Makerspace graylog server |
| .54 | librespeed | Makerspace wifi speed testing aid |
| .55 | swarm-host | Single board computer netboot server |
| .56 | wailord | Why are you running docker inside lxc??? Hosts the mattermost makerspace kanban boards. |
| .57 | stor | Makerspace local nextcloud |
| .58 | wireguard | VPN for the weirdos who keep asking Brandon to access the makerspace remotely |
Virtual Machines and Cluster
IP addresses 10.110.0.64/27.
| IP | Name | Comment |
|---|---|---|
| .64 | debianct0 | Hosted on proxmox01 |
| .65 | virtualDebian | Hosted on Proxmox |
| .66 | cryDebian | Hosted on MAGLAB-CRYZEN |
| .67 | toastDebian | Hosted on Toaster |
Notes on Migration and Configuration
The goal is for the actual configuration files (minus secrets) to be stored at https://github.com/MAGLaboratory/miscellaneous-scripts while specific instructions such as directory ownership are described in this section.
Connor
VSFTP is very picky about home chroot permissions and will exit with 500 OOPS: vsftpd: refusing to run with writable root inside chroot() if the chroot is writeable.